FLOW MEASUREMENT & CONTROL
FLP/IS FLOW SWITCH 
Code 240
Application
To prevent conveyor drives from operating if insufficient water is circulated through motor cooling jacket.
Features
F.L.P. or I.S. versions.
Ranges
Flow Settings – 5 LPM to 130 LPM
Maximum Dimensions
H – 124mm
W – 90mm
L – 250mm
Please click for a full product specification download
FLOW METER 
Code 452G
Application
To monitor water flows on dust suppression systems on coal cutting machines.
Features
In line mounting. Insensitive to attitude. High pressure shock resistant unit. Good viscosity stability. Variable orifice design.
Ranges
Flow rate ranges from 20 to 2200 LPM are available and the max working pressure: 313 to 140 BAR respectively.
1/2", 1", 11/4", 11/2", 2" BSP & NPT sizes
Maximum Dimensions
H – 78mm
W – 80mm (1" unit)
L – 168mm
Please click for a full product specification download
FLOW/PRESSURE METER 
Code 477G
Application
As a diagnostic checking of volume flow rate and pressure for onboard monitoring of ITP water systems on coal cutting machines.
Features
Glycerene damped pressure gauge, in-line mounting. Insensitive to attitude. Based on variable area 452 flow meter. 3/4" to 11/2" BSP sizes available.
Ranges
Flow Rate – 20 - 2200 LPM units available.
Pressure – 315 BAR max.
Maximum Dimensions
H – 78mm
W – 105mm (1" unit)
L – 243mm
Please click for a full product specification download
EMULSION METER 
Code 4818
Application
To produce an oil/water emulsion for use in machine hydraulics. (E.G. roof supports.)
Features
Mix proportional to water flow rate. Independent of pressure. Changeable oil pump drive gears to ensure correct oil mix in different site environments. No power supply needed.
Ranges
Flow Rate –135 LPM max
Flow Rate – 14 LPM min
Pressure – 140 BAR max
Maximum Dimensions
H – 160mm
W – 172mm
L – 225mm
Please click for a full product specification download
BY-PASS FLOW METER 
Code 4912
Application
For monitoring large flow rates at high pressure on roof support feed lines.
Features
Small compact unit.
10:1 turndown range.
11/2" BSP to 4" BSP sizes.
BSP screwed, victaulic or super stekko connections.
Ranges
Flow rate – 4540 LPM max
Pressure – 315 BAR max
Maximum Dimensions
Please see the catalogue for dimensions of individual units.
Please click for a full product specification download
BY-PASS ELECTRONIC FLOWMETER
Code 4912E
Application
For monitoring large flow rates at high pressure on roof support feed lines.
Features
ATEX and IECEX Certified
Ranges
Flow Rate – 4540 LPM max
Pressure – 400 BAR
Maximum Dimensions
Please see catalogue for dimensions of individual units.
Please click for a full product specification download
ELECTRONIC FLOW METER 
Code 5050A
Application
To monitor water flows on various systems on coal cutting machines.
Features
ATEX and IECEX Certified
Ranges
Flow Rate – 400 LPM max
Pressure – 400 Bar max
Output Voltage – 4 to 2 Vde or 4 to 20 mA
Maximum Dimensions
H – 135mm
W – 65mm
L – 180mm
Please click for a full product specification download
FLOW TRIP DEVICE 
Code 5063
Application
Used to sense the presence of a token flow and isolates pumps, motors and other machinery when fire fighting water is being used.
Features
Customer set trip options
Ranges
Flow Rate – 1000 LPM max
Pressure – 25 BAR max
Maximum Dimensions
H – 123mm
W – 94mm
L – 230mm
Please click for a full product specification download
